 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Medium power transistor (32V, 2A) 2SB1188 / 2SB1182 / 2SB1240 Features 1) Low VCE(sat). VCE(sat) = 0.5V (Typ.) (IC/IB = 2A / 0.2A) 2) Complements the 2SD1766 / 2SD1758 / 2SD1862. Dimensions (Unit : mm) 2SB1188 0.50.1 4.5+0.2 -0.1 1.60.1 2SB1182 1.50.3 6.50.2 5.1+0.2 -0.1 +0.2 1.5 -0.1 C0.5 2.3+0.2 -0.1 0.50.1 5.5+0.3 -0.1 4.00.3 2.5+0.2 -0.1 Structure Epitaxial planar type PNP silicon transistor (1) (2) (3) 0.40.1 1.50.1 1.00.2 +0.1 0.4-0.05 0.75 0.9 0.650.1 0.40.1 1.50.1 0.50.1 3.00.2 0.550.1 2.30.2 2.30.2 1.00.2 ROHM : MPT3 EIAJ : SC-62 (1) Base (2) Collector (3) Emitter (1) (2) (3) ROHM : CPT3 EIAJ : SC-63 (1) Base (2) Collector (3) Emitter Abbreviated symbol: BC 2.50.2 2SB1240 6.80.2 0.65Max. 1.0 0.50.1 (1) (2) (3) 2.54 2.54 1.05 0.450.1 ROHM : ATV (1) Emitter (2) Collector (3) Base Denotes hFE Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Symbol VCBO VCEO VEBO IC Limits -40 -32 -5 -2 -3 0.5 PC 2SB1182 2SB1240 Junction temperature Storage temperature Tj Tstg 2 10 1 150 -55 to 150 Unit V V V A(DC) A (Pulse)1 W W 2SB1188 Collector power dissipation 2 3 W (Tc=25C) W C C 1 2 3 Single pulse, Pw=100ms When mounted on a 40x40x0.7 mm ceramic board. Printed circuit board, 1.7mm thick, collector copper plating 100mm2 or larger. www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 14.50.5 4.40.2 0.9 1/3 2009.12 - Rev.B 2.5 9.50.5 0.9 1.5 2SB1188 / 2SB1182 / 2SB1240 Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. -40 -32 -5 - - - 120 - - Typ. - - - - - -0.5 - 100 50 Max. - - - -1 -1 -0.8 390 - - Unit V V V IC= -50A IC= -1mA IE= -50A VCB= -20V VEB= -4V IC/IB= -2A/ -0.2A VCE= -3V, IC= -0.5A VCE= -5V, IE=0.5A, f=100MHz VCB= -10V, IE=0A, f=1MHz Conditions Data Sheet A A V - MHz pF Measured using pulse current. Packaging specifications and hFE Package Code Type 2SB1188 2SB1182 2SB1240 hFE QR QR QR - - - Basic ordering unit (pieces) T100 1000 Taping TL 2500 - TV2 2500 - - hFE values are classified as follows : Item hFE Q 120 to 270 R 180 to 390 Electrical characteristic curves VCE= -3V -0.5 Ta=25C COLLECTOR CURRENT : IC (mA) -1.75mA DC CURRENT GAIN : hFE -1000 Ta=100C 25C -500 -40C -200 -100 -50 -20 -10 -5 -2 -1 COLLECTOR CURRENT : IC (A) -2.5mA -2.25mA 500 VCE= -6V -3V -1V Ta=25C -0.4 -2mA -1.5mA -1.25mA -1mA -750A -500A 200 -0.3 100 -0.2 50 -0.1 -250A 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0 -2.2 BASE TO EMITTER VOLTAGE : VBE (V) 0 0 -0.4 -0.8 -1.2 IB=0A -1.6 -2 20 -5 -10 -20 -50 -100 -200 -500 -1000 -2000 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (mA) Fig.1 Grounded emitter propagation characteristics Fig.2 Grounded emitter output characteristics Fig.3 DC current gain vs. collector curren ( ) www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.12 - Rev.B 2SB1188 / 2SB1182 / 2SB1240 500 Ta=100C 25C -25C 200 VCE= -3V COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV) Data Sheet -500 Ta=25C COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV) -500 lC/lB=10 DC CURRENT GAIN : hFE -200 -200 -100 -50 100 -100 IC/IB=50 50 Ta=100C 25C -40C -50 20 10 -5 -10 -20 -50 -100 -200 -500 -1000 -2000 20 -20 -5 -10 -20 -50 -100 -200 -500 -1000 -2000 -5 -10 -20 -50 -100 -200 -500 -1000 -2000 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( ) Fig.5 Collector-emitter saturation voltage vs. collector current ( ) Fig.6 Collector-emitter saturation voltage vs. collector current ( ) TRANSITION FREQUENCY : fT (MHz) Ta=25C -1 IC /IB=10 -0.5 500 Ta=25C VCE= -5V COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) BASE SATURATION VOLTAGE : VBE(sat)(V) 300 200 100 50 Cib Ta=25C f=1MHz IE=0A IC=0A Cob 200 100 -0.2 -0.1 -0.05 20 10 50 -5 -10 -20 -50 -100 -200 -500 -1000 -2000 COLLETOR CURRENT : IC (mA) 5 10 20 50 100 200 500 1000 2000 -0.5 -1 -2 -5 -10 -20 -30 EMITTER CURRENT : IE (mA) COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.7 Base-emitter saturation voltage vs. collector current Fig.8 Gain bandwidth product vs. emitter current Fig.9 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage -5 IC Max. (pulse) -5 IC Max. (Pulse) DC PW=500s COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) -2 -1 -0.5 -0.2 -0.1 -0.05 -0.02 Ta=25C Single nonrepetitive pulse -0.01 -0.1 -0.2 -0.5 -1 -2 -1 -0.5 -0.2 -0.1 -0.05 =1 Pw D C -2 -5 -10 -20 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.10 Safe operation area (2SB1188) s 0m =1 Pw s m 00 -50 PW=1ms PW=100ms Ta=25C Single nonrepetitive pulse -0.01 -0.1 -0.2 -0.5 -1 -0.02 -2 -5 -10 -20 -50 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.11 Safe operation area (2SB1182) www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.12 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of 2SB118809
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |